Due to the unique blade design, Reiko shears must be maintained as outlined below.

Care and maintenance is the key element in achieving maximum performance from your shears.

Please note: Failure to perform proper care and maintenance on a daily basis will most likely result in a damaged shears and unsatisfactory performance.
Please take the time to carefully read the following information. Maintained properly, Reiko shears will perform incredibly well.

1.Cleaning:
Using a soft cloth towel, thoroughly wipe your Reiko shears and blades after every cut.

This will reduce build-up of chemicals and debris, which may adversely affect the performance of your Reiko shears throughout your workday. At the end of the day make certain your Reiko shears are thoroughly dry between the blades.

2. Lubrication:
   After cleaning and drying your Reiko shears, carefully open to a 90 degree angle. Put one or two drops of top quality scissors oil provided with your Reiko shears into the "joint". It assists the cleaning process by washing out dirt and debris from under the pivot and leaves a wax like 
   coating. This should be done at least once a workday.

Why Oil and Clean Daily?
Daily oiling and cleaning will enhance the performance and extend the cutting life of your Reiko shears. Regular cleaning and lubrication protects against rust and deterioration from chemical/ moisture contact in the salon environment, build-up of bacteria attracting debris in the interior pivot and blade area, reduces friction from blade movement, and prolongs sharpness.

3. Adjusting Tension (Balancing):
   Adjusting tension is an important part of getting the best results from your Reiko shears. If your shears have a diamond studded dial, it is important not to rub on the jewels while turning the tension knob.

Repeated pressure on the jewels can cause them to break off. Rather, turn the dial from the ridged area around the side, not from the top.

If the tension is too loose, it will allow your Reiko shears to fold the hair. If it is too tight, it will cause unnecessary wear and user fatigue.

To test for tension, hold the shears with the tips pointed upward. Lift one handle up so the blade is in a ninety-degree angle and let the blade fall closed. If the blade falls completely closed the tension is too loose. Rather, it should close about two thirds of the way.

4. Storage
   When your Reiko shears are not being used, keep blades in a closed position. This will reduce the chance of nicking and accidental damage to the blades.
   Never use magnets to hold Reiko shears in storage. This can magnetize the blades attracting undesirable dust and other particles.
   How you store your Reiko shears is very important. For adequate protection and ease of travel, you should store your Reiko shears in the case provided.

They should be secured in one position. Leather is the material that is most recommended for storage.

5. Sharpening
   Your Reiko shears, if maintained properly, will have a very long lasting edge. When the time does come for re-sharpening, the process must be done carefully through a professional sharpening service center that has the facility and experience to sharpen high quality Japanese style shears. 
   Please do your research before allowing your shears to be sharpened by a center.

Warranty will be void if improper sharpening damages your shears.

6. Do’s and Don’ts:

Do’s:
a) Clean, dry and lubricate your Reiko shears at the end of each workday.

1. b) Check your Reiko shears for adjustment (tension), at least once each day.
2. c) Check your Reiko shears for sharpness at least once each month.
3. d) Handle your Reiko shears with gentle care. Protect the edges from everything except

    clean hair.

1. e) Store and transport your Reiko shears in the case they came in or in a leather
   case/holster.

Don’ts:
a) Don’t use your Reiko shears when they are nicked from dropping.

1. b) Don’t store your Reiko shears when dirty.
2. c) Don’t "throw" your Reiko shears in a drawer when not in use.
3. Don’t let your Reiko shears come into contact with any comb sterilization, perm or color solution; it may cause corrosion and other damage to your Reiko shears.

Further Correspondence: 
For further questions/concerns please contact us. [email protected] / [email protected]